Low Pass Filters

2.2 KHz – 33 KHz

Emicon Corporation offers a standard line of Low Pass Filters featuring a decade of cutoff frequencies starting at 2.2 KHz to 33 MHz. They are packaged in a rectangular can with BNC connectors on both Input and Output. All filters have a termination impedance of 50 ohms In and Out. These filters feature very sharp cutoff characteristics. Other connector options and enclosure configurations are available upon request.

See the Part Number list


47 KHz – 470 KHz

Emicon Corporation offers a standard line of Low Pass Filters featuring a decade of cut off frequencies starting at 47 KHz to 430 MHz. They are packaged in a tubular case 1.5″ long and .875″ in diameter. They are connectorized and the standard units are available with SMA, N or BNC type connectors. We offer both 3 pole and 5 pole designs depending upon your attenuation requirements. All filters have a termination impedance of 50 ohms in and out and are rated for a maximum voltage of 100 volts peak. Ripple is 0.2 dB Maximum. They are designed for panel mounting or in-line applications. Other connector options are available upon request.

BNC Connectors, 3 poles

BNC Connectors, 5 poles

N Connectors, 3 Poles

N Connectors, 5 Poles

SMA Connectors, 3 Poles

SMA Connectors, 5 Poles


Custom Filter?

If you have a custom Low Pass filter requirement give as a call at (915) 590 0795 or email your requirements to tim@emiconcorp.com